Так выложите, пожалйста.
PTC Pro/Engineer Wildfire v2.0 (3.0)
- Автор темы Jonny
- Дата начала
- Статус
Так выложите, пожалйста.
Выкладывай на рапиду, а сюда ссылку.
anickolsky
Турист
- Credits
- 0
плиз коперни просто в форум че там пишут а то даже при регистрации надо ещё апгрейдить свой аккаунт чтобы получить доступ а я номер незнаю придурки с работы до сих пор сказать не могут
anickolsky
Турист
- Credits
- 0
плиз коперни просто в форум че там пишут а то даже при регистрации надо ещё апгрейдить свой аккаунт чтобы получить доступ а я номер незнаю придурки с работы до сих пор сказать не могут
#1
Pro/ENGINEER Wrongly Updates Number of Pattern Instances of a Reference Patterned Copy Geometry Feature Pattern, if the Number of Instances is Changed in the Referenced Part. 940451
HIGH All FEATURE OPERATIONS 2001
2002100 Wildfire 3.0
M070 2006-01-30
126263
#2
When copying features, Pro/ENGINEER duplicates some relation lines and adds them to the end of the relations file. This happens even when all relations are commented out. 1006063
HIGH All RELATIONS 2001
2003090 Wildfire 3.0
M070 2006-01-30
129969
#3
Cannot Create Standard Round on a Drafted Cylindrical Surface under Certain Circumstances which worked well in Pro/ENGINEER 2001. 1144696
HIGH All FEATURE Wildfire 2.0
M130 Wildfire 3.0
M070 2006-05-05
132626
#4
Unable Execute #Edit#Cut, #Edit#Copy, And #Edit#Paste In New Parameter UI. 1164903
HIGH All RELATIONS Wildfire 2.0
M102 Wildfire 3.0
M070 2006-04-17
133092
#5
redefining a sketch twice created using "use edge" from curves and add fillets or other geometry, makes the sketch unstable. 1253386
HIGH Windows XP SKETCHER Wildfire 2.0
M180 Wildfire 3.0
M080 2006-05-29
133317
#6
The arrow head of the dimension lines are missing when plotting to a Tiff and CGM format using #Clipped option. 1255702
HIGH All PLOT Wildfire 3.0
M010 Wildfire 3.0
M070 2006-10-02
134075
#7
The multi-tip tool parameters TIP#_OFFSET and TIP#_TOOL_COMMENT are not properly evaluated. When retrieving the tool, in the offset table the comments are missing and the offset numbers get incremented instead of using the parameter values. 1275134
HIGH All MANUFACTURING Wildfire 2.0
M230 Wildfire 3.0
M070 2006-08-28
134180
#8
Plotting a multiline text with a box in the first line to either hpgl2, tiff or cgm the box will be plotted wrong. On screen the box is ok. Changing the text to a single line text the plot will be ok. 1278552
HIGH Windows XP PLOT Wildfire 2.0
M200 Wildfire 3.0
M070 2006-09-07
134279
#9
It is Not Possible to Create an Analysis Feature from a Saved Analysis in Wildfire 3.0 1281498
HIGH All Behavioral Modeler Wildfire 3.0
M030 Wildfire 3.0
M080 2007-03-09
134591
#10
When Saving a Layout In Linked Mode: Save/Conflict Error Of The Type "Cannot Handle instance ´XXXXXXX` because ´XXXXXX´already exists" 1284054
TOP All Windows Windchill ProjectLink integration Wildfire 2.0
M230 Wildfire 3.0
M070 2006-11-02
134776
#11
Cannot modify the TTF text error message : "Sketched Text produces degenerate strokes" in the sketcher. 1296995
HIGH All Windows SKETCHER Wildfire 3.0
M030 Wildfire 3.0
M070 2006-10-25
134786
#12
Probe Orientation is Lost If User adds Steps other than a Measured Step. 1297526
HIGH All PRO/CMM Wildfire 3.0
M050 Wildfire 3.0
M070 2006-10-26
134787
#13
In a milling NC sequence which has been created in release Wildfire 2.0, a sketched tool can not be modified in release Wildfire 3.0 1297525
HIGH All MANUFACTURING Wildfire 3.0
M050 Wildfire 3.0
M070 2007-02-06
134788
#14
When Customer Redfines a Ref_Csys created with CUSTOM Option the Previous Selected Degrees of Freedom are unset. 1297554
HIGH All PRO/CMM
A230 Wildfire 3.0
M070 2006-11-24
134805
#15
Creating a new skeleton component by template causes that the following read only feature becomes unregenerated. Issue does not exist in Release 2001 1298477
HIGH All FEATURE OPERATIONS Wildfire 2.0
M220 Wildfire 3.0
M070 2006-11-02
134853
#16
Performance issue : Style feature. curve from reference. When using this feature and approximating in spline with high quality, moving or copying this spline is very long graphically within the style feature. 1300546
HIGH All Windows Style Wildfire 3.0
M030 Wildfire 3.0
M070 2006-11-06
134892
#17
When reversing the flow direction of a pipe, for all eccentric reducers the pipelines no longer fit to the reducer (as soon as the reducer gets redefined). It seems the pipelines are offset into the wrong direction. 1301292
HIGH All PIPING Wildfire 2.0
M240 Wildfire 3.0
M070 2006-11-09
134893
#18
Toolpath Display Function for 5-axis Mill-Turn Operation Shows Old Style Menu Driven Dialog Box Instead of New CD Player Type Play Path Dialog Box 1301355
HIGH All MANUFACTURING Wildfire 3.0
M040 Wildfire 3.0
M070 2007-04-27
134918
#19
Saving a drawing with the config option save_drawing_picture_file to embedded and the option pen_table_file pointing to a pen table file, this file will be used saving the preview data for the drawing. Now previewing the drawing the lines are to thick 1302199
HIGH Windows XP GLOBAL FUNCTIONS Wildfire 2.0
M130 Wildfire 3.0
M070 2007-01-11
134951
#20
Drawing View Creation for Large Assemblies Created or Saved in Wildfire or Later is Slower than Anticipated in Wildfire 3.0 1299343
HIGH All DETAIL Wildfire 3.0
M020 Wildfire 3.0
M070 2007-01-30
134966
#21
Pro/ENGINEER prematurely exits after selection of a cylindrical surface of a step surface reference model upon definition of a holemaking NC sequence. There is still the message "No diameters to choose from" and after that Pro/ENGINEER aborts. 1304394
HIGH Windows XP MANUFACTURING Wildfire 3.0
M040 Wildfire 3.0
M070 2007-01-26
135025
#22
It Is Not Possible to Include a Copy Geometry Feature in a Local Group in Part Mode. 1306334
HIGH All Windows FEATURE OPERATIONS Wildfire 3.0
M050 Wildfire 3.0
M070 2007-02-13
135049
#23
In Process Manager of Wildfire 3.0, "ALL" Step Parameters Edited From Icon Below Process Table Lists "NOT REQUIRED" Parameters Instead of "ALL" Like in Wildfire 2.0 1307777
HIGH All Windows MANUFACTURING Wildfire 3.0
M050 Wildfire 3.0
M070 2007-02-12
135055
#24
During a Download/Checkout/Add to Workspace In Wildfire 2.0 M230, of a CAD Document created in Pro/ENGINEER 2001 and checked in via WGM, the Parameter originally of type boolean, is converted to type Integer. 1299718
TOP All Windows Windchill ProjectLink integration Wildfire 2.0
M230 Wildfire 3.0
M070 2006-11-28
135056
#25
When Exporting a Drawing to PDF in Wildfire 3.0 Using the True-Type Font Option Extra Spaces are Added to Note Text that is Longer than 70 Characters 1277901
HIGH All Windows 2D_INTERFACE Wildfire 3.0
M020 Wildfire 3.0
M070 2006-11-28
135059
#26
Exporting an assembly with a filename of 28 up to 31 characters to STEP or VDA " an error appeares "file name too long", nothing will be exported. 1308396
HIGH Windows XP 3D_INTERFACE Wildfire 2.0
M191 Wildfire 3.0
M070 2006-11-28
135073
#27
Toolkit and J-Link are Failing at Renaming Versioned Objects, particularly Changing PTC_COMMON_NAME Value is Not Possible. 1296841
HIGH All Pro/TOOLKIT Wildfire 3.0
M050 Wildfire 3.0
M070 2006-11-30
135076
#28
Mechanisms Dynamics may transfer incorrectly oriented reaction forces to Structure for ball, bearing joints. 1191040
TOP All Pro/MECHANISM Wildfire 2.0
M200 Wildfire 3.0
M070 2006-12-20
135232
#29
The Wildfire Embedded Browser (Internet Explorer) Creates Multiple Temporary Files in the %TEMP% Folder For Each Server Registration Which Are Not Subsequently Deleted. 1314741
HIGH All Windows Windchill ProjectLink integration Wildfire 2.0
M230 Wildfire 3.0
M070 2007-01-29
135259
#30
After mirroring a trajectory sequence, approach and exit motions are wrong dependent on set mirror option "keep" or "mirror". 1316356
HIGH Windows XP MANUFACTURING Wildfire 3.0
M020 Wildfire 3.0
M070 2007-02-02
135285
#31
When outputting CLDATA, CIRCLE commands with different pitch (e.g. circular cut and helical exit) are merged into a single CIRCLE command (hence, the pitch is incorrect). The tool path displayed is correct. 1317237
HIGH All MANUFACTURING Wildfire 2.0
M240 Wildfire 3.0
M070 2006-12-18
135294
#32
Extruded feature with up-to-surface reference to an internal datum plane (old on-the-fly datum) which is not parallel to the sketching plane fails upon redefinition in Wildfire3.0. 1317604
HIGH All FEATURE Wildfire 3.0
M060 Wildfire 3.0
M070 2006-12-19
135379
#33
After moving red Insert Here arrow in model tree before specific Component Pattern and then back another flexible assembled component fails. 1277400
HIGH Windows XP ASSEMBLY Wildfire 2.0
M230 Wildfire 3.0
M070 2007-01-08
135380
#34
Pro/ENGINEER prematurely exits if specific cable id has been selected in model tree with all of its children followed by right mouse button #Delete. 1295577
HIGH Windows XP CABLE Wildfire 2.0
M230 Wildfire 3.0
M080 2007-01-08
135382
#35
Retrieving assemblies from workspace, using "RMB open" and the config option "retrieve_instance_dependencies instance_deps_only" is set, no graphics will appear. 1321868
HIGH Windows XP FAMILY TABLE Wildfire 3.0
M040 Wildfire 3.0
M070 2007-01-23
135526
#36
An OLET is wrongly placed when inserted on a Branch line routed from a Start point which has been located from a previous fitting. 1327017
HIGH All PIPING Wildfire 3.0
M040 Wildfire 3.0
M070 2007-01-16
135575
#37
Axis created for extrude features during feature reorder in model tree will not be placed on the axis layer. 1328729
HIGH Windows XP FEATURE Wildfire 3.0
M050 Wildfire 3.0
M080 2007-01-19
135651
#38
Tangency Definition on Swept Blends Gives Wrong Result or May Fail When Trajectory Curve Direction Is Inverted. 1330198
HIGH All Windows SURFACE Wildfire 3.0
M060 Wildfire 3.0
M080 2007-03-21
135662
#39
Pro/ENGINEER Exits Prematurely On Startup When Logging Into The Server. The std.out Reports "Exception - code was -1073741819." 1314634
HIGH Windows XP Workgroup Manager for Pro/ENGINEER Wildfire Wildfire 2.0
M230 Wildfire 3.0
M070 2007-02-15
135695
#40
When flattening a wire, the marker on the wire fails. After failure, the user cannot use edit definition. 1305481
HIGH Windows XP HARNESS Wildfire 3.0
M030 Wildfire 3.0
M070 2007-02-09
135696
#41
RAMP_ANGLE has been set to 5 but it could not be recognized in a ROUGHING NC-Sequence. 1302173
HIGH Windows XP MANUFACTURING Wildfire 3.0
M030 Wildfire 3.0
M070 2007-02-09
135716
#42
Pro/ENGINEER Prematurely Exits When Importing A Third Party XML File Into Pro/CABLING 1326023
HIGH All CABLE Wildfire 3.0
M060 Wildfire 3.0
M070 2007-01-29
135717
#43
Pro/CABLING does not Recognize Lowercase Pin Names when the Uppercase Pin Name is also in the Design. 1329755
HIGH All CABLE Wildfire 3.0
M060 Wildfire 3.0
M070 2007-02-02
135718
#44
Curve-from-file Features Are Automatically Created As ATB Features Regardless Of The TOPOBUS_ENABLE Config Setting 1325999
HIGH All Topobus Wildfire 3.0
M060 Wildfire 3.0
M070 2007-01-29
135719
#45
The Resume Button Cannot be Selected for a Mapkey that has been Paused. 1301918
HIGH All GLOBAL UI ELEMENTS Wildfire 3.0
M050 Wildfire 3.0
M070 2007-02-02
135721
#46
The Pro/TOOLKIT Function ProSelbufferSelectionRemove() Returns PRO_TK_BAD_INPUTS If Drawing Symbols Are Currently Selected. 1282036
HIGH All Pro/TOOLKIT Wildfire 2.0
M230 Wildfire 3.0
M070 2007-01-30
135722
#47
The ProSubstitution Structure Of The ProSimprepdataitem For A Simplified Representation Substitution By Envelope Or Interchange Assembly Is Not Populated Properly 1316619
HIGH All Pro/TOOLKIT Wildfire 3.0
M060 Wildfire 3.0
M070 2007-01-30
135723
#48
When Creating a Subroutine Using the Individual Pattern Style with Rotation the CL Data Outputs a MULTAX ON Command. 1324441
HIGH All MANUFACTURING Wildfire 3.0
M050 Wildfire 3.0
M070 2007-05-01
135826
#49
When an Assembly is Opened in a Linked Session of Pro/ENGINEER Wildfire 2.0, #Select the Component #Right Mouse Button Click #Update is Missing. 1182559
HIGH All GLOBAL UI ELEMENTS Wildfire 2.0
M180 Wildfire 3.0
M070 2007-02-06
135936
#50
When Creating a Sheet Metal Manufacturing Sequence With Machine Type PUNCH Specified, a RAPID Command is Inserted within the CL Data After Clamps are Repositioned. 1315957
HIGH All SHEET_MFG Wildfire 2.0
M240 Wildfire 3.0
M070 2007-02-16
135982
#51
Check surfaces is not taken correctly into account in the case of a drill moving between two check surfaces which it will never touch. 1152265
HIGH All Windows MANUFACTURING
Wildfire 3.0
M080 2007-02-23
135997
#52
Each time when retrieving a layout from a workspace and saving it again, the file size increases significantly, until the layout exceeds a certain size (normally somewhere between 30 and 100 MB) where it can no longer be retrieved. 1296184
HIGH All LAYOUT Wildfire 2.0
M230 Wildfire 3.0
M080 2007-02-16
136014
#53
Some components loose their reference to spec-driven piping (spec-driven parameters get lost) when using replace function (#Fitting;#Replace
on them. 1337674TOP All PIPING Wildfire 2.0
M250 Wildfire 3.0
M080 2007-02-19
136016
#54
Reference Dimensions attached on patterned features show wrong values if there are shown in a drawing. 1119935
HIGH All FEATURE OPERATIONS Wildfire
M230 Wildfire 3.0
M070 2007-02-23
136044
#55
Workspace Synchronize Performance Is Poor For Large Workspaces (i.e. 1000+ objects) 1305114
HIGH All Workgroup Manager for Pro/ENGINEER Wildfire Wildfire 3.0
M030 Wildfire 3.0
M080 2007-03-30
136069
#56
The values of family tables cells will be lost when only the generic is put into workspace. 1340363
HIGH Windows XP Windchill PDMLink integration Wildfire 3.0
M060 Wildfire 3.0
M070 2007-02-22
136190
#57
Java script Errors when Viewing Workspaces in Embeded Browser and when some Model Attributes are Containing Special Characters 1340505
TOP All Windows Workgroup Manager for Pro/ENGINEER Wildfire Wildfire 3.0
M060 Wildfire 3.0
M070 2007-02-28
136353
#58
CUTCOM parameter does not work for local milling sequence referencing tool path of previous sequence. 1333976
HIGH Windows XP MANUFACTURING Wildfire 3.0
M030 Wildfire 3.0
M080 2007-03-12
136386
#59
CreateDrawingFromTemplate() May Randomly Throw an Unknown Exception on Machines with Nvidia Graphics Cards 1325369
HIGH All Windows Pro/Web.Link Wildfire 3.0
M020 Wildfire 3.0
M080 2007-03-19
136387
#60
J-Link Environment Misconfigurations Can Cause Pro/ENGINEER to Exit. 1323517
HIGH All Windows J-Link Wildfire 3.0
M030 Wildfire 3.0
M080 2007-03-21
136396
#61
Common Name is not displayed correctly on UI's of Rename, Check In, CDPP, etc for a cad document having special characters in PTC_COMMON_NAME and Java Script Error. 1342837
HIGH Windows XP Workgroup Manager for Pro/ENGINEER Wildfire Wildfire 3.0
M060 Wildfire 3.0
M070 2007-03-16
136397
#62
Java script error is appearing on "Undo Check Out" UI & after clicking on "WS structure report link" and "WS Family report link" on CDPP if user creates CAD Doc having single quote (i.e ') in PTC_COMMON_NAME. (See Long Description) 1342145
HIGH Windows XP Workgroup Manager for Pro/ENGINEER Wildfire Wildfire 3.0
M060 Wildfire 3.0
M070 2007-03-16
136398
#63
Common Name is not displayed correctly on UI's of Rename, Check In, CDPP, etc for a cad document having special characters in PTC_COMMON_NAME. 1342839
HIGH Windows XP Workgroup Manager for Pro/ENGINEER Wildfire Wildfire 3.0
M060 Wildfire 3.0
M070 2007-03-16
136628
#64
When Creating Negative Values For tm Tolerances in Family Tables, They Appear Positive in Drawing Repeat Regions. 1326405
HIGH All Windows DETAIL Wildfire 3.0
M040 Wildfire 3.0
M070 2007-03-27
136802
#65
Drawing Views of Simplified Representations or Part's Instances In Session Does Not Update When Replacing The IBL Curve File With ATB Enabled. 1331564
HIGH All Windows Topobus Wildfire 3.0
M060 Wildfire 3.0
M080 2007-04-05
136830
#66
Assemblies Loaded with the Legend Loader Fail to Check In with the Error ""Can not build "######": build can not subsume link to "#######", quantity mismatch. 1325973
HIGH All Workgroup Manager for Pro/ENGINEER Wildfire Wildfire 2.0
M230 Wildfire 3.0
M070 2007-04-06
137090
#67
ModelCHECK tries to open HTML report even if NOCHECK condition (parameter) is matching parameter value. Issue is specific to drawing mode. 1193886
HIGH All Windows ModelCHECK Wildfire 3.0
M010 Wildfire 3.0
M070 2007-05-04
А ссылку сюда?
Я тут пару часов с бубном поплясал и нашел виновника глюков на новых сборках прое, после русификации.
Это оказался файл pro6.cmp.
Он находится в proewildfire\text\russian
Его надо снести либо заменить на англ., кот. в
proewildfire_prov\text\usascii
П.С.
Глюки: Не показывает значение диаметра, расстояния... при анализе... при добавлении материала какую-то фигню выдает...
Это оказался файл pro6.cmp.
Он находится в proewildfire\text\russian
Его надо снести либо заменить на англ., кот. в
proewildfire_prov\text\usascii
П.С.
Глюки: Не показывает значение диаметра, расстояния... при анализе... при добавлении материала какую-то фигню выдает...
Ты крут. В М060 заработало.
Парни, тут SHooTERS зарелизили WF3 M070 x64...
Могу выложить, тока две проблемы
1) Сделать из их 3-х дисков Multilanguage однодисковый англтйский не могу (нет Win x64)
2) По той же причине не могу проверить их ломик
P.S. В принципе, если anickolsky, cможет по своим каналам скачать, сделать и выложить английский рип М070 х64 , то можно будет выложить тока ломик...
Могу выложить, тока две проблемы
1) Сделать из их 3-х дисков Multilanguage однодисковый англтйский не могу (нет Win x64)
2) По той же причине не могу проверить их ломик
P.S. В принципе, если anickolsky, cможет по своим каналам скачать, сделать и выложить английский рип М070 х64 , то можно будет выложить тока ломик...
anickolsky
Турист
- Credits
- 0
М090 выйдет 25 июня... М080 есть уже... думаю правельнее выложить М080х64?
- Статус